SEARCH THIS SITE
Headline:
Hiltron to Debut Super-HMAM 4.9m Motorised Antenna Mount at IBC2017
Picture:
Hiltron_Super-HMAM_antenna_mount
Body Text:

Stuttgart, Germany, July 4, 2017: Hiltron Communications has chosen IBC2017 as the venue for the introduction of the Super-HMAM large-capacity motorised antenna mount. Based on the highly successful HMAM three-axis motorised antenna mount, Super-HMAM is designed and built to accept much larger reflectors.
 

"Produced for two-way VSAT communication or receive-only downlink applications, Super-HMAM was originally developed for a major German customer and is now being added to our catalogue," comments Hiltron Managing Director Jan Molter. "It accommodates satellite transmission antennas of up to 4.9 metres diameter compared with the 2.7 metre maximum antenna capacity of the standard HMAM. Integral to Super-HMAM is a newly developed support structure which can survive the storm conditions experienced at high-altitude relay and transmission locations where wind speeds can exceed 200 kilometres per hour. All models in the HMAM range provide full motorised control of x and y axes as well as transmission beam polarity."

Like the standard HMAM, Super-HMAM can be controlled via an IP link from a PC running a graphic user interface compatible with standard web browsers. The control GUI displays all the information required to set and maintain azimuth, elevation and polarisation, including current position and target position plus a database of potentially accessible satellites. Once a satellite is selected, precise access parameters can be calculated at the press of a single button.

The Super-HMAM antenna control unit and associated motor-control electronics are contained in an IP65-rated weatherproof outdoor housing with a hinged front-access port secured by dual key screws. An emergency cut-off switch is easily accessible. Above the housing is a resolver which is used to measure the azimuth angle of the antenna. An identical second resolver allows constant monitoring of antenna elevation. Azimuth and elevation drive motors each operate through a reduction gear.

The entire antenna support system is built to withstand standard atmospheric pollutants and to operate at humidity levels of zero to 95 per cent over a temperature range from minus 25 degrees up to 35 degrees (optionally 55 degrees) Celsius. Additional protection can optionally be provided to withstand pollutants such as salt encountered in coastal and industrial areas. The rotating pedestal mount is made of corrosion-resistant hot-dip galvanised steel.

Hiltron GmbH (www.hiltron.de) is a globally active system integrator, manufacturer and distributor in the field of satellite and wireless communication. The company operates from modern purpose-built headquarters at Backnang near Stuttgart. On-site facilities include a large technical operations area with high access doors and ceiling, capable of accommodating satellite link vehicles and their roof-mounted antennas.


Contacts for further information

Hiltron Communications: Antonio Monteverde
Tel: +49 (0)7191 343 570
Email:
antonio.monteverde@hiltron.de

Newsmedia support: David Kirk, Stylus Media Consultants
Tel: +44 (0) 1342 311 983
Email:
stylusmedia@gmail.com


 


 

LATEST NEWS

Date
04-07-2017
Small Thumbnail
,
Short Summery

Stuttgart, Germany, July 4, 2017: Hiltron Communications has ...

Date
29-03-2017
Small Thumbnail
,
Short Summery

Hiltron Communications, a leading specialist in satellite and...

Date
17-01-2017
Small Thumbnail
,
Short Summery

 Stuttgart, Germany, January 17, 2017: Hiltron Communica...

NEWSLETTER

Your Email-Address:

HILTRON GmbH Emil-Rathenau-Str. 1 D-71522 Backnang T: +49-7191-343570 F: +49-7191-3435750 Mail: info@hiltron.de  IMPRINT

This website uses cookies for measuring traffic and optimizing the site's content. By continuing to browse, you are accepting the use of cookies. Read more